Available in 8/4

CABINET SKIP grade is used by customers who may want a thinner net finish for panel production, cabinetry, and furniture.

CABINET SKIP consists of boards that will grade as Cabinet when re-dressed .13 inches.

Widths: 3 ½ inch minimum

Lengths: 6 foot minimum

Minimum Size Cuttings: 3 inches by 3 feet’ or 4inches by 2 feet’ C2F. No Limit to the number of cuttings allowed

Grade Notes: This grade admits all boards of 2 feet and over surface measure yielding not less than 66.66 percent clear two face cuttings. Boards are graded from the poorer face.

SIDE BEND is limited to 1 inches.

PIN KNOTS are not considered defect.

Skip less than .100 inch (depth combined from both faces) is not considered defect.